Lynx Systems

Your Link to Duress & Mass Notification

950 LYNX 4O 31

LynxNet® 4O SKU: 950-LYNX-4O-31

The LynxNet® 4O is a network based output device with 4 “Normally Open” relays. When an alarm is sent from the LynxGuide server, the LynxNet® 4o can be selected as an output for the alarm to activate any or all of the four relays. The relays can stay closed for a pre-configured time period or until a reset clear is sent.

Add power to the relay circuit to turn on lights or use the relays as a logical tie-in to other systems. Standard configuration is “Normally Open” and optionally can be ordered as “Normally Closed”. The LynxNet®4O-31 has 8 amp relays for power applications. The LynxGuide server also fully supervises the device and can activate an alarm if the connection is lost.

The LynxNet® 4O output device is ideal for connecting into access control systems, controlling other devices or connecting into monitored alarm panels to contact law enforcement or other responders.

Resources & Downloads

Features & Benefits

  • Enables up to four, 8 Amp relay outputs to tie into existing alarm panels or to turn on/off strobes/sirens/electronic locks
  • Allows physical integration with third party systems
  • Supervised by the LynxGuide server
Request More Information

Communication Protocol

The LynxNet hardware and Lynx Client software achieves bidirectional communication through a client-initiated, persistent socket session to the LynxGuide server on ports 10117-10121. No network ingress connections are required. All server communications are TLS encrypted. In addition to providing security, this method is ideal if the hardware is behind a gateway, as no NAT rules are required to achieve connectivity.

Product Specifications

Weight 1.2 lbs
Dimensions 5.25 × 5.00 × 2.20 in
Supervision Interval (minutes)

5 minutes
Power

DC Power or PoE
PS Input Voltage

100-240 VAC
PS Output Voltage

12 VDC, 1.0 amp
POE

Class 0
RS-232

For diagnostics and troubleshooting
USB

For diagnostics and troubleshooting
Link LED

Indicates network traffic
LAN LED

Indicates network speed
Status LED

Indicates activity to and from the LynxGuide server.
Test Button

Sends a test message to the LynxGuide server
Power LED

SOLID RED: Not connected to the LynxGuide server. FLASHING RED: Communication lost to LynxGuide server. FLASHING GREEN: Connected to the LynxGuide server.
RJ-45 Network Connector

100 Mb for initial network configuration and network connection