The LynxNet® 32O output device has 16, 1 amp relay outputs controlled by the LynxGuide server. The standard configuration is “Normally Opened” (NO) and optionally can be ordered as “Normally Closed” (NC). The LynxNet®32o has a 1 amp relay with gold contacts for control signals. The LynxNet® 32O series output devices are ideal for connecting into access control systems or connecting into monitored alarm panels to contact law enforcement or other responding agencies.
LynxNet® 32O SKU: 950-LYNX-32O-32
Resources & Downloads
Features & Benefits
- Enables up to thirty-two,1 Amp dry relay outputs (gold contacts), to tie into existing alarm panels or control signals
- Monthly test mode allows testing of the button and training of the employee
- Supervised by the LynxGuide server
Communication Protocol
The LynxNet hardware and Lynx Client software achieves bidirectional communication through a client-initiated, persistent socket session to the LynxGuide server on ports 10117-10121. No network ingress connections are required. All server communications are TLS encrypted. In addition to providing security, this method is ideal if the hardware is behind a gateway, as no NAT rules are required to achieve connectivity.
Product Specifications
| Weight | 19.4 lbs |
|---|---|
| Dimensions | 18.50 × 12.50 × 4.00 in |
| Supervision Interval (minutes) | 5 minutes |
| Power | AC Power |
| PS Input Voltage | 100-240 VAC |
| PS Output Voltage | 5.0 VDC, 38W,7.6 Amps |
| RS-232 | For diagnostics and troubleshooting |
| USB | For diagnostics and troubleshooting |
| Link LED | Indicates network traffic |
| LAN LED | Indicates network speed |
| Status LED | Indicates activity to and from the LynxGuide server. |
| Test Button | Sends a test message to the LynxGuide server |
| Power LED | SOLID RED: Not connected to the LynxGuide server. FLASHING RED: Communication lost to LynxGuide server. FLASHING GREEN: Connected to the LynxGuide server. |
| RJ-45 Network Connector | 100 Mb for initial network configuration and network connection |
