Lynx Systems

Your Link to Duress & Mass Notification

950 LYNX 1O POE

LynxNet® 1O SKU: 950-LYNX-1O-POE

The LynxNet® 1O is a network output device that does not require a computer. Power can be PoE. Configuration is easy with a 12 VDC Power or PoE supply and a direct Ethernet connection to a PC. Once configured, the LynxNet® P2-M can operate on a 12 VDC Power, PoE supply, or the built-in PoE module.

The 4-pin connector provides a Normally Open (NO) and Normally Closed (NC). When any Lynx input is activated through the LynxGuide server, the LynxNet® 1o can be selected as output and activate the 1.0 amp output relay.

Resources & Downloads

Features & Benefits

  • Enables a one, 1 Amp dry relay outputs (gold contacts), to tie into existing alarm panels or control signals
  • Monthly test mode allows testing of the button and training of the employee
  • Supervised by the LynxGuide server
Request More Information

Communication Protocol

The LynxNet hardware and Lynx Client software achieves bidirectional communication through a client-initiated, persistent socket session to the LynxGuide server on ports 10117-10121. No network ingress connections are required. All server communications are TLS encrypted. In addition to providing security, this method is ideal if the hardware is behind a gateway, as no NAT rules are required to achieve connectivity.

Product Specifications

Weight 1.2 lbs
Dimensions 4.8 × 3.2 × 3.2 in
Supervision Interval (minutes)

5 minutes
Power

DC Power or PoE or PoE
PS Input Voltage

100-240 VAC
PS Output Voltage

12 VDC, 1.0 amp
POE

Class 0
Test Button

Sends a test message to the LynxGuide server
Power LED

SOLID RED: Not connected to the LynxGuide server. FLASHING RED: Communication lost to LynxGuide server. FLASHING GREEN: Connected to the LynxGuide server.
RJ-45 Network Connector

100 Mb for initial network configuration and network connection