Lynx Systems
Your Link to Duress & Mass Notification
The LynxNet 16O output device has sixteen 8 amp relay outputs controlled by the LynxGuide server. The standard configuration is “Normally Opened” (NO) and optionally can be ordered as “Normally Closed” (NC). The 8-amp relays are ideal for power applications.
The LynxNet 16O series output devices are ideal for connecting into access control systems or connecting into monitored alarm panels to contact law enforcement or other responding agencies.
The LynxNet hardware and Lynx Client software achieves bidirectional communication through a client-initiated, persistent socket session to the LynxGuide server on ports 10117-10121. No network ingress connections are required. All server communications are TLS encrypted. In addition to providing security, this method is ideal if the hardware is behind a gateway, as no NAT rules are required to achieve connectivity.
| Weight | 19 lbs |
|---|---|
| Dimensions | 18.50 × 12.50 × 4.00 in |
| Supervision Interval (minutes) | 5 minutes |
| Power | AC Power |
| PS Input Voltage | 100-240 VAC |
| PS Output Voltage | 5.0 VDC, 38W,7.6 Amps |
| RS-232 | For diagnostics and troubleshooting |
| USB | For diagnostics and troubleshooting |
| Link LED | Indicates network traffic |
| LAN LED | Indicates network speed |
| Status LED | Indicates activity to and from the LynxGuide server. |
| Test Button | Sends a test message to the LynxGuide server |
| Power LED | SOLID RED: Not connected to the LynxGuide server. FLASHING RED: Communication lost to LynxGuide server. FLASHING GREEN: Connected to the LynxGuide server. |
| RJ-45 Network Connector | 100 Mb for initial network configuration and network connection |
