Lynx Systems

Your Link to Duress & Mass Notification

950 LYNX 1O POE

LynxNet 1O SKU: 950-LYNX-1O-POE

The LynxNet 1O is a network output device that does not require a computer. Power can be PoE. Configuration is easy with a 12 VDC Power or PoE supply and a direct Ethernet connection to a PC. Once configured, the LynxNet P2-M can operate on a 12 VDC Power, PoE supply, or the built-in PoE module.

The 4-pin connector provides a Normally Open (NO) and Normally Closed (NC). When any Lynx input is activated through the LynxGuide server, the LynxNet 1o can be selected as output and activate the 1.0 amp output relay.

Resources & Downloads

Features & Benefits

  • Enables a one, 1 Amp dry relay outputs (gold contacts), to tie into existing alarm panels or control signals
  • Monthly test mode allows testing of the button and training of the employee
  • Supervised by the LynxGuide server

Communication Protocal

The LynxNet hardware and Lynx Client software achieves bidirectional communication through a client-initiated, persistent socket session to the LynxGuide server on ports 10117-10121. No network ingress connections are required. All server communications are TLS encrypted. In addition to providing security, this method is ideal if the hardware is behind a gateway, as no NAT rules are required to achieve connectivity.

Request More Information

Product Specifications

Weight 1.2 lbs
Dimensions 4.8 × 3.2 × 3.2 in
Supervision Interval (minutes)

5 minutes
Power

DC Power or PoE or PoE
PS Input Voltage

100-240 VAC
PS Output Voltage

12 VDC, 1.0 amp
POE

Class 0
Test Button

Sends a test message to the LynxGuide server
Power LED

SOLID RED: Not connected to the LynxGuide server. FLASHING RED: Communication lost to LynxGuide server. FLASHING GREEN: Connected to the LynxGuide server.
RJ-45 Network Connector

100 Mb for initial network configuration and network connection