The LynxNet 1i is a network input device that does not require a computer. Power can be PoE. Configuration is easy with a 12 VDC Power or PoE supply and a direct Ethernet connection to a PC. Once configured, the LynxNet P2-M can operate on a 12 VDC Power, PoE supply, or the built-in PoE module. The 4-pin connector accepts N.O. or N.C. (programmable via web interface) with Status LED and EOL resistor support, with a wire length of up to 5000 feet. When activated, the button instantly sends an alert to the LynxGuide server, allowing any Lynx output device to be activated.
LynxNet 1i SKU: 950-LYNX-1I-POE
Resources & Downloads
Features & Benefits
- Enables any Normally Open (NO) and Normally Closed (NC). Existing or new alarm to be connected directly to your PoE network.
- Monthly test mode allows testing of the button and training of the employee
- Supervised by the LynxGuide server
Communication Protocal
The LynxNet hardware and Lynx Client software achieves bidirectional communication through a client-initiated, persistent socket session to the LynxGuide server on ports 10117-10121. No network ingress connections are required. All server communications are TLS encrypted. In addition to providing security, this method is ideal if the hardware is behind a gateway, as no NAT rules are required to achieve connectivity.
Product Specifications
| Weight | 1.2 lbs |
|---|---|
| Dimensions | 4.8 × 3.2 × 3.2 in |
| Supervision Interval (minutes) | 5 minutes |
| Power | DC Power or PoE |
| PS Input Voltage | 100-240 VAC |
| PS Output Voltage | 12 VDC, 1.0 amp |
| POE | Class 0 |
| Test Button | Sends a test message to the LynxGuide server |
| Power LED | SOLID RED: Not connected to the LynxGuide server. FLASHING RED: Communication lost to LynxGuide server. FLASHING GREEN: Connected to the LynxGuide server. |
| RJ-45 Network Connector | 100 Mb for initial network configuration and network connection |
