SuperEx-Pro
The SuperEx-Pro products are 900 Mhz wireless duress systems. These systems do not require a Lynx server.
| SuperEx-Pro
Receiver Dimensions: 7.1”W X 5.0”D X 3.3”H |
| SuperEx-Pro4The SuperEx-Pro4 is a 900 Mhz wireless portable duress system designed for employee protection and human resource applications where instantaneous notification of security personnel is desired. The SuperEx-Pro receiver will alarm with the audible buzzer and/or flash the visual blue strobe alarm when one of the four wireless handheld panic button is pressed. The SuperEx-Pro4 has indicators for which button was pressed and a dry marker area for each channel allows marking of panic button location. Wireless panic buttons are supervised by the SuperEx-Pro4 receiver and will illuminate the transmitter fault LED if a transmitter has a low battery. Typical transmission range indoors is approximately 250-500 feet, depending on building construction. Optional wireless repeaters allow for greater distance.
|
![]() | SuperEx-Pro16The SuperEx-Pro16 is a 900 Mhz wireless portable or permanent duress system designed for employee protection and human resource applications where instantaneous notification of security personnel is desired. The SuperEx-Pro16 receiver will alarm with the audible buzzer and/or flash the visual blue strobe alarm when any of the 16 wireless handheld panic buttons are pressed. The SuperEx-Pro16 has indicators for which button was pressed and a dry marker area for each channel allows marking of panic buttons location. Wireless panic buttons are supervised by the SuperEx-Pro16 receiver and will illuminate the transmitter fault LED if a transmitter has a low battery. Typical transmission range indoors is approximately 250-500 feet, depending on building construction. The SuperEx-Pro16 system includes two (2) wireless repeaters for greater distance. The system is pre-programmed. Receiver Dimensions: 11.09W X 8.5”D X 3.8”H |
| Hand Held Panic Button
|
![]() | Optional Weatherproof Pendant
|
![]() | Optional High Powered Indoor RepeaterRepeaters receive a signal from any wireless transmitter, verifies it, and then amplifies the signal back to peak power. It is easy to install, with no programming required. Just "plug and play" to extend range, even in large installations. It can also be supervised. This transceiver is a practical wireless solution for "open-air" installations such as campuses, multi-story buildings, office complexes, and other large wireless projects. Comes with 14 VAC/20 VA transformer. |
|
|
|
|
|




